-
by Paula Lara
Before printing, your file must be set to CMYK (Cyan, Magenta, Yellow, Black) which is the standard for all print production and differs significan...
-
by Paula Lara
When setting up artwork for print, it’s key to understand bleed, trim, and safe zones—these ensure your final display looks clean, professional, an...
-
by Paula Lara
A key component to assemble the SEGO lightbox is the Horizontal End Clip, located at the edge of each of the horizontal extrusions with the lights...
-
by Paula Lara
The correct method for installing graphics:
Setting up Silicone Edged Graphics (SEG) for your tradeshow can create a professional and eye-catching...
-
by Paula Lara
RGB vs. CMYK color guide
Your graphics are ready to print, the design has been approved by the marketing team, and now all that's left is to pull t...
-
by Anthony Ramirez
Designing graphics across two or multiple panels on your trade show displays? The following tips can lend a hand and answer some questions you m...
-
by Paula Lara
Whether you're new to designing backlit graphics or looking to enhance your booth's visual impact, here are three steps to craft stunning backlit g...
Use left/right arrows to navigate the slideshow or swipe left/right if using a mobile device