The correct method for installing graphics:

Setting up Silicone Edged Graphics (SEG) for your tradeshow can create a professional and eye-catching display due to its smoothed outlook. The appropriate steps for installing graphics are the following.

Step 1 : Corners First

Make sure to have your frame already set up and ready for graphics placement, then lay it down on the floor for an easier set up posture.

Extend your graphics to the center of the frame edge to edge and start inserting the graphics in each corner.  Make sure the silicone edges are INSIDE the edge of the frame.

Step 2 : Insert Middle 

Work your way around installing the rest of the graphics from the middle into the groove. 

Step 3 : Smooth Out Last

Extend the rest of the graphic into the rest of the edge in the frame and you should be done!